This PS5 came into our Mill Road workshop in Cambridge for one thing: the HDMI port had stopped working. The owner asked for just the port and did not think the console needed a clean. Like every console we repair, we opened it, took photos and sent them to the owner before doing anything else. This is why a PS5 deep clean belongs with every HDMI repair, and why we always say so.
It took some convincing, but the owner saw the photos and agreed to the new HDMI port, a full deep clean and fresh liquid metal.
What was inside a PS5 that “did not need a clean”
The fan intake was felted shut with dust. Behind it, the heatsink fins that carry the heat away from the processor were caked over, and fluff lined the inside of the case.



There was more. The inside of the cover had a dried spill on it, and even the side vents were clogged with dust.


After: the same PS5 once our deep clean was done. Compare it with the fan intake photo above: the felted dust is gone, and air can flow through again.

Why a PS5 deep clean belongs with every HDMI repair
A PS5 has one big fan that pulls air through those fins, and its processor sits under the heatsink on liquid metal, not ordinary paste. When the fins are blocked and the liquid metal has dried out, the heat has nowhere to go. Heat is what kills a PS5: once the main chip has cooked, the console is usually beyond repair.
A new HDMI port is careful work. The old port comes off the board and a new one is soldered on, pin by pin, under the microscope. Paying for that and then closing the console up with all this dust inside makes no sense. In our experience, a PS5 left like this is on its way to cooking within a year or two.
Ask around and some shops will quote about £20 less for the port alone. Too often that means: open it, a blast of air, close it and hand it back, without a word about the mess inside, as if it did not matter.
We have seen what happens next
Earlier this month a PS5 came to us with an HDMI port that another shop had replaced about six months before, and it had stopped working again. The port had not been done properly, but what struck us most was this: nobody had told the owner what the inside looked like. Dust everywhere, and the liquid metal on the processor dried out. We wrote that job up here: a PS5 with no picture after a repair elsewhere.
How we work: photos first, honest advice, your decision
- We open it and photograph the HDMI port, the fan, the fins and the liquid metal, and send you the photos on WhatsApp.
- We always tell you when it needs a deep clean and fresh liquid metal, and we show you why.
- Nothing extra is done without your OK.
- It is tested before you collect it, and you get photos of the work.
It is not the cheapest way to fix an HDMI port, and we say so. But a PS5 that is cleaned and given fresh liquid metal while it is open has a real chance of a long life. One closed up full of dust does not.
Frequently asked questions
Does a PS5 need a deep clean when the HDMI port is replaced?
We always recommend it. The console is already open, and a new port does nothing about a blocked fan, blocked fins or dried-out liquid metal. Heat is what kills a PS5, not the port.
Can a PS5 be repaired after it overheats?
Often not. Once the main chip has cooked, the console is usually beyond repair. That is why we clean it and renew the liquid metal while it is open, before it gets that far.
Why do you send photos of the inside?
So you see what we see and decide for yourself. Nothing extra is done without your OK.
PS5 repair in Cambridge and Dagenham
PS5 with no picture, running loud or switching off? See our PS5 repair, HDMI port and deep clean service, see what dried-out liquid metal looks like inside a PS5, or book an appointment: WhatsApp or call 07497 925760. Our Mill Road workshop is at 163 Mill Road, Cambridge CB1 3AN, by appointment.
